Špecifikácia
Material: PLA, 1.75 mm diameter
Weight: 1 kg/spool (2.2 lbs)
Length: approx. 340 m
Density pri 21.5 °C: 1.237 g/cm3
Melt Flow Index at 10min, 2.16kg: 6.38
Melt Point: 195 - 220 °C
Heat-Deflection-Temperature pri 0.455 MPa: 137 °C
Yield Strength pri 5mm/min: > 8.9 MPa
Tensile Break: 580 ... 600%
Diameter: 1.75 ± 0.05 mm
Spool dimensions: 200 mm diameter x 67 mm height x 60 mm central palice

Systémové požiadavky
A 3D printer s 1.75 mm extrúderom temperature okolo 200 °, suitable pre PLA filament